Free UK Delivery Over $63*
0% V12 Finance Integration
Price Match Promise
SALE

Crank Brothers Pedal - Eggbeater 2

Code: 4264
  • Now $111
Currently no stock available  -   |   Usually dispatched within 48 hours
awarded when you purchase this product
Loading...

The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out.  They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank?  To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring.  This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. 

The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC, trail riding and cyclo cross.

  • Cleat: Premium brass cleats included
  • Shims: Included
  • Release Angle: 15° to 20°
  • Warranty: 5 years
  • Weight: 280g per pair
  • Spindle: Forged scm435 chromoly steel
  • Body: cast stainless steel
  • Wings: stamped stainless steel
  • Spring: 300 series stainless steel
  • Inner bearing: Bushing
  • Outer bearing: Cartridge
  • Maximum rider weight: No restrictions
  • Special edition colours: Silver/Black

You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282).  They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).

You may also like to run the pedals on your road / commuter bike.  Buy a set of Quattro cleats (CRB-15289) to use on your road shoes.  It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals.

As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729).  Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.

 

All out products are shipped by DHL/UKMail providing unprecedented reliability and speed.

Shipping on all domestic orders over $630 (excluding bikes and home trainers) for delivery within the UK is completely FREE!

Bike and Home Trainers and oversize Goods FREE - DHL/UKMail

To qualify for free shipping:

Your delivery address must be within the United Kingdom Mainland (Channel Islands, Isle of Mann and Scotish Isles are not Mainland)

Your order, after any discounts, must be $63 or over

For all other orders including those under $63 there is a postage charge of $10


European & International delivery charges are zoned out as follows.(Bikes are not shipped internationally)

Zone 1 - Belgium, Luxemborg, France, Netherlands, Germany, Republic Of Ireland, Northern Ireland, Chanel Islands, North Scotland

Zone 2 - Austria, Liechtenstein, Denmark, Switzerland

Zone 3 - Czech Republic, Slovakia, Italy, Spain

Zone 4 - Estonia, Portugal, Finland, Slovenia, Hungry, Sweden, Poland

Zone 4 - Bosnia-Herzegovina, Lithuania, Bulgaria, Montenegro, Croatia, Norway, Greece, Romania, Iceland,Serbia, Latvia

International Zones

Delivery costs will be clearly stated on the checkout page, though you will need to register (to provide your delivery address) in order to see the delivery costs.

If you have any questions about delivery charges, times or none delivery please do not hesitate to get in touch by email:store@swinnertoncycles.co.uk or by telephone on +44 (0)1782 768622. Handling is normally 48 hours, but at busy periods this may be extended but we will endeavour to process your order within 5 working days, please contact us for more details

 

Be the first to review Pedal - Eggbeater 2. Write a review ›
Top